NEWS

 
punkt

 FrontPage

punkt

 History

punkt

 News

punkt

 Tractor

punkt

 Links

punkt

 Sponsored by

Tractor pulling, the most powerful sport in the world

  

 

05.07.2010

Mysak have attended the 2nd race in the Norway Cup as the only pro stock. Finally the tractor is working as it is supposed to. Now it's just to figure out to run the tractor and reading the track. Movie from the pull, press the link.

 

01.07.2009

Back home after attending the Wings and Wheel show in Telemark last weekend.

 

19.04.2009

Finally the new engine in Mysak have done some RPM's. Mysak is almost ready for the 2009 season, minor details are to be prepared for the first competition in May. Movie

24.07.2008

First start up of the engine ended with broken bearings caused by a water leak into the oil sump. Now the engine is dismantled and new bearings to be installed. Movie from the first start up: Movie (Poor quality)

30.06.2008

The new engine and frame has taken much more time than expected. Mysak has missed both the Norwegian competitions and the chance for attending the European Championship. At the moment we are waiting for som parts from the US and some parts produced at local work shop. Hopefully We will be able to start in Herning in the end of July.

25.02.2008

A lot of needed parts has arrived the workshop. Some adjustments needs to be done and then the assembly of the tractor can start.

16.02.2008

Mysak is Puller Of The Year 2007!

21.11.2007

A lot of people paid us a visit during the open day. A lot of good pulling discussions and stories were told. The big news this day was the new owners (Team Jærbuen) of the Dutch modified puller Black Cat.

 

11.11.2007

Pulling schedule 2008

Euro cup 2008

 

10.11.2007

The engine is machined to 8,3L. Several parts are in production and the first milestone is to complete the chassis within the 21 of November. The 21 of November we are going to have open house for everybody that are interested in tractor pulling.

 

21.10.2007

The new frame and hood are under construction.

 

10.09.2007

18. place in the European Championship. Problems with the clutch caused to no power to the rear wheels when the load got heavy. For complete result list see http://em2007.dk/resultat_dk.php. Movie of the pulls: 1st Pull 2nd Pull

 

26.08.2007

We have decided to compete in the EM in Herning this year. Some adjustments have to be done and we are going to use the Firestone puller wheels from Innovator to get the right traction. See http://em2007.dk for more information regarding EM 2007.

 

12.08.2007

We got a 4th place, beaten by 3 of the Danish Euro cup pro-stocks. By this we got 20 points in the Norwegian Cup and we have 60 points in total that makes us the winner of the Norwegian cup this year. For complete result list please see Norges Tractor Pulling Forbund homepage. Movie of the first pull. Pull off.

 

09.07.2007

The production of the new frame has started.

 

09.06.2007

Mysak won the Norwegian Championship with 92,93 meters in the pull off. For complete result list please see Norges Tractor Pulling Forbund homepage. Movie of the first pull Movie of the second pull Pull off

 

20.05.2007

Mysak got a third place in the Pro Stock class. The Danish pro stock team Bukke Bruse got the first place and Danish pro stock team Blue Rabbit got the second place. For complete result list please see Norges Tractor Pulling Forbund homepage. Movie of the pull

 

19.05.2007

Preparation of the field. We spent all day working on the field to prepare this for the first run in the NC.

16.05.2007

Competitor list for Norwegian Cup the 20 of May, follow the link (link)

 

10.05.2007

Almost ready for NC the 20 of May.

 

18.04.2007

Rear end and gear box has been repainted. The tractor is now ready for completion.

 

09.04.2007

New gear ratio has been installed in the gear box. Some minor adjustments had to be done to make this gear ratio fit.

 

19.03.2007

Roll over protection has been modified. This can now be removed for transport.

13.03.2007

New crank from Rough & Tumble Pro Stock team has arrived the work shop. Now we will have a bit longer stroke in the new engine.

 

03.02.2007

New gear ratio is bought from the Snoopy pulling team. We will replace the low gear ratio with a gear ratio that is a bit higher than the standard high gear ratio.

 

21.01.2007

By the end of 2007 Mysak will have a new design. This because of the new engine and more HP. The picture gives you an idea of how the tractor is going to look like, but a lot can change during the year.

 

12.01.2007

The gear box and rear end of the tractor are going through a major upgrade. The tractor is being prepared for the new engine that will be mounted by the end of 2007.

 

25.08.2006

Testing of the new Bryne Pulling Arena. The field where not too good in the beginning, but became better after some pulls. The tractor worked well with turbo charging pressure near by 6 Barg! After the pulling there was arranged pulling party for all the pullers. This was a nice end of the Norwegian pulling season of 2006.

 

 

 

 

 

 

 

21.08.2006

The tractor is ready for test pulling on the new Bryne pulling arena the 26 of August. The exhaust manifold gasket is changed, the hole in the engine oil sump is fixed an new oil is filled.

05.08.2006

We where running show on Etnemarknaden Saturday and Sunday the 5 and 6 august. In second pull on Saturday the gasket on the exhaust manifold blow and we had problems to build up charging pressure. In first pull on Sunday we lost a plug in the engine oil sump and lost some engine oil. The two other pro-stock (Victoria and Lady Blue) got problems during the first pull and couldn't run for the second pull. We wanted to run the second pull, and had to find a solution to fix the leak. We used a bit of cloth to stop the leak and run the second run quite well.

 

25.06.2006

New drawbar is fabricated and painted. Now we easy can adjust the height and length of the drawbar.

29.04.2006

First round of NC at Randaberg. The tractor worked well, but not heavy enough in the back. We came 6 metres at first try. Second try was better, with a little bit over 66 metres.

16.04.2006

The clutch is unassembled for inspection. Norges Tractor pulling Forbund  by Tom Westergård inspects the clutch, watches the tractor, and approves it. 2 mm cover around the turbo becomes made and assembled the next days.

07.04.2006

The tractor arrives Sola. 

01.04.2006

The tractor becomes bought in Motala in Sweden from Mats Johansson. We test the tractor, and find this very interesting.